Android 6.0.1 Factory Images now available for Nexus devices

Factory images for the Android 6.0.1 update are now available for a variety of Nexus phones and tablets.

The update is now available for the following Nexus devices:

  • Nexus 6P
  • Nexus 6
  • Nexus 5X
  • Nexus 5
  • Nexus Player
  • Nexus 9
  • Nexus 7

To flash a system image:

  1. Download the appropriate system image for your device, then unzip it to a safe directory.
  2. Connect your device to your computer over USB.
  3. Start the device in fastboot mode with one of the following methods:
    • Using the adb tool: With the device powered on, execute:
      adb reboot bootloader
    • Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device. For example, to put a Nexus 5 (“hammerhead”) into fastboot mode, press and hold Volume Up + Volume Down + Power as the device begins booting up.
  4. If necessary, unlock the device’s bootloader by running:
    fastboot oem unlock

    The target device will show you a confirmation screen. (This erases all data on the target device.)

  5. Open a terminal and navigate to the unzipped system image directory.
  6. Execute the flash-all script. This script installs the necessary bootloader, baseband firmware(s), and operating system.

Once the script finishes, your device reboots. You should now lock the bootloader for security:

  1. Start the device in fastboot mode again, as described above.
  2. Execute:
    fastboot oem lock

Locking bootloader will wipe the data on some devices. After locking the bootloader, if you want to flash the device again, you must run fastboot oem unlock again, which will wipe the data.